Clean Room Pharma HVAC System

• Customization: Available
• Certification: CE, ISO9001, GMP
• Noise: 60-70db
• Model NO.: HM MCR
• Application: Industrial
• Control Mode: Remote Control
• Usage: Dust Removal, Smoke Removal, Adding Negative Ion, Humidification
• Transport Package: Sea Worthy Packing
• Specification: as required
• Trademark: HM PHARMACHINE
• Origin: Zhejiang China
• HS Code: 8422303001

Product Description

HM Pharma HVAC System 

• Modular Air Handling Unit

 Main Configuration and Parameters:
 1.Air Mixing section                    
2.Primary filter section:  G4 
3. Surface Cooling section,  
4.Heating section(Optional): hot water or electricity or steam.

5.Fan section: air fan to supply the air.  

6.Middle filtering section: F8 

7.Humidifier section(Optional).  

8.Clean air supply section. to the filter box or to the room.

9.Air volume: 1,000-200,000 m3/h.  

10.Temperature range :18~28^ºC

11. Relative humidity range:45~65% 

Desiccant Rotor Dehumidifier
the desiccant rotor will absorb the moisture from the inlet air, so the inlet air get a humidity reduction, and the rotor will exhaust the moisture by renewable hot air drying.  
Air volume: 1,000-30,000 m3/h.  
Relative humidity range:below 45% 
 

Water Chiller System    
-Modular Air Cooled Chiller

Featured with modular design, can assemble multiple modules together for the required capacity, no need cooling tower, cooling water tank and circulation pump and loops, easy installation, easy operation, and easy maintenance.
Single module parameters:
Compressor: Scroll type. Refrigerant: Freon R22. Optional: R410A, 407etc.
Cooling capacity: 65KW/set. Or 100KW/set.  
Total range 65-1600KW for choose
Cooling water: outlet 7 ºC/inlet 12 ºC,  Outdoor temperature: 35ºC.

Water-cooled Screw Chiller
Cooling capacity: various models from 140KW to 1680KW for choose..
 

Air Duct System:

Air duct is made from galvanized steel sheet,
 Plastic Rubber insulation foam, Thickness: 25mm,
Fire retardant rate: class B.

 

Modular Clean Room Partition Wall and Ceiling System 

Modular construction, Easy and fast to install; Full flush system, wall to wall, wall to floor, wall to ceiling radius corners. High quality and strong surface finish


HPL series High Class HPL Paneling System( Melamine High Pressure Laminates)

1. 1. High density and hardness, High resistance to scratches and abrasion
   2. High resistance to impact, bump, No dents
   3. Good resistance to humidity, water and steam.
   4. Resistance to fire and low smoke density,  Class B or A
   5. Cleanable with all major cleaning agents and detergents.
   6. No paints and Non corrosive, No peel off dust and rust.
   7. No microorganism growth, anti-bacteria, antistatic properties
   8. A long life time, maintenance free

HPL Sandwich Panel Specification:
-Double sides HPL sheet Skin,    HPL skin thickness: 4mm, or 3mm
-Surface is smooth flush,  Fire resistance is class B or A. 
- Standard Color: white/ivory.    Various colors for choose.
- Panel standard thickness : 50 mm,   Can custom-made 100 mm thickness.
-Panel standard width: 1200mm ,
 Panel standard length: 2400mm, 3000mm
-Insulation core material: TPS, EPS, PU, AH etc various material can be chosen.
-Supporting frame: 4 sides aluminum profile rimmed.

 

1. Europe Technology,HM China Manufacturing.                 
2. Facility Engineering Design, Manufacturing and Supply
3. Project Management, Quality Control  
4. Construction, Installation & Commissioning
5. Qualification, Testing,  Validation (DQ, IQ, OQ) 
6.  Turnkey Projection Completion
7. ISO9001 Quality Management System       
8. International ISO14644  Standard /US FED. STD 209E
9. Compliance with cGMP requirement:  WHO,  EU,  FDA, TGA, MHRA etc.
10. For Pharmaceutical, Laboratory, Biotech, Medical, Hospital, Healthcare, Food, Cosmetics, Electronic, Solar Industry.