HM Pharma HVAC System
Modular Air Handling Unit
Product Description
Main Configuration and Parameters:
1.Air Mixing section
2.Primary filter section: G4
3. Surface Cooling section,
4.Heating section(Optional): hot water or electricity or steam.
5.Fan section: air fan to supply the air.
6.Middle filtering section: F8
7.Humidifier section(Optional).
8.Clean air supply section. to the filter box or to the room.
9.Air volume: 1,000-200,000 m3/h.
10.Temperature range :18~28ºC
11. Relative humidity range:45~65%
Desiccant Rotor Dehumidifier
the desiccant rotor will absorb the moisture from the inlet air, so the inlet air get a humidity reduction, and the rotor will exhaust the moisture by renewable hot air drying.
Air volume: 1,000-30,000 m3/h.
Relative humidity range:below 45%
Water Chiller System
-- Modular Air Cooled Chiller
Featured with modular design, can assemble multiple modules together for the required capacity, no need cooling tower, cooling water tank and circulation pump and loops, easy installation, easy operation, and easy maintenance.
Single module parameters:
Compressor: Scroll type. Refrigerant: Freon R22. Optional: R410A, 407etc.
Cooling capacity: 65KW/set. Or 100KW/set.
Total range 65-1600KW for choose
Cooling water: outlet 7 ºC/inlet 12 ºC, Outdoor temperature: 35ºC.
-- Water-cooled Screw Chiller
Cooling capacity: various models from 140KW to 1680KW for choose..
Air Duct System:
Air duct is made from galvanized steel sheet
Plastic Rubber insulation foam
Thickness: 25mm,
Fire retardant rate: class B.
Detailed Photos
HEPA Filter Air Supply Box
HEPA filter H13 or H14 cover(round) cover(square)
Air Volume: 500, 1000, 1500, 2000 M3/h, Stainless steel cover of PCGI cover,
Fan Filter Unit(FFU)
Stainless Steel Housing FFU Or Alu Housing FFU
Air Volume: 500, 1000, 1500, 2000 M3/h
Lighting and Electricity System
Flush type GMP Model Light
Lighting lamp: Fluorescent or LED.
Model: 20W*2; 30W*2; 40W*2; 40W*3
Modular Clean Room Partition Wall and Ceiling System
Modular construction, Easy and fast to install; Full flush system, wall to wall, wall to floor, wall to ceiling radius corners. High quality and strong surface finish.
HPL series High Class HPL Paneling System( Melamine High Pressure Laminates)
- High density and hardness, High resistance to scratches and abrasion
- High resistance to impact, bump, No dents
- Good resistance to humidity, water and steam.
- Resistance to fire and low smoke density, Class B or A
- Cleanable with all major cleaning agents and detergents.
- No paints and Non corrosive, No peel off dust and rust.
- No microorganism growth, anti-bacteria, antistatic properties
- A long life time, maintenance free
HPL Sandwich Panel Specification:
-Double sides HPL sheet Skin, HPL skin thickness: 4mm, or 3mm
-Surface is smooth flush, Fire resistance is class B or A.
- Standard Color: white/ivory. Various colors for choose.
- Panel standard thickness : 50 mm, Can custom-made 100 mm thickness.
-Panel standard width: 1200mm ,
Panel standard length: 2400mm, 3000mm
-Insulation core material: TPS, EPS, PU, AH etc various material can be chosen.
-Supporting frame: 4 sides aluminum profile rimmed.
HM PCR series Modular PPGI Paneling System
Modular flush system: flush with walls, windows, doors.
Steel skin in two sides: Pre-Painted Galvanized Iron sheet.(PPGI)
Standard Thickness: 0.5mm, 0.6mm as optional
Sandwich panel thickness: standard 50mm, 100m as optional choice.
Panel Width: 1180mm, 980mm, Panel Length: 2400mm, 3000mm.
Steel frame in four sides, a strong supporting. Joint by " +" bar .
HM ECR series Eco type PPGI Paneling System
Sandwich panel thickness: 50mm.
Panel Width: 1180mm, 980mm, Panel Length: 2400mm-4000mm.
Steel skin thickness: 0.476, 0.426, or 0.376mm
No steel frame in four sides, Joint by male & female type.
Insulation Core Materials:
| |
Density |
Fire resistance |
Thermal conductivity |
| Thermal-setting Polystyrene(TPS) |
30-40kg/m3 |
class: B, A |
0.030-0.036 W/mK |
| Expanded Polystyrene(EPS), |
12-15kg/m3 |
class: E, D |
0.035-0.040 W/mK |
| Rock Wool/(RW) |
100-120 kg/m3 |
class: A |
0.037 -0.050W/mK |
| Polyurethane Foam(PU) |
35-40 kg/m3 |
class: E, D |
0.022-0.028 W/mK |
| Polyisocyanurate Foam(PIR), |
40 kg/m3 |
class: B |
0.018-0.026 W/mK |
| Aluminum Honeycomb(AH) |
35 kg/m3 |
class: A |
0.045-0.056 W/mK |
| Paper Honeycomb(PH) |
12-18 kg/m3 |
class: B |
0.040-0.050 W/mK |
Ceiling panel connection: Concealed "H" type hanger system for walkable ceiling.
Or by unconcealed T grid hanger system for non-walkable ceiling.
HM Modular Clean Room System
- High Class HPL Modular Panel System
- Advanced HPL Flushed Doors and Windows
- Europe Technology,HM China Manufacturing.
- Facility Engineering Design, Manufacturing and Supply
- Project Management, Quality Control
- Construction, Installation & Commissioning
- Qualification, Testing, Validation (DQ, IQ, OQ)
- Turnkey Projection Completion
- ISO9001 Quality Management System
- International ISO14644 Standard /US FED. STD 209E
- Compliance with cGMP requirement: WHO, EU, FDA, TGA, MHRA etc.
- For Pharmaceutical, Laboratory, Biotech, Medical, Hospital, Healthcare, Food, Cosmetics, Electronic, Solar Industry.
HM Modular Clean Room System
Modular Clean Room Partition Wall and Ceiling System
-- HM HPL series High Class HPL Paneling System
-- HM PCR series Modular PPGI Paneling System
-- HM ECR series Eco type PPGI Paneling System
Doors, Windows & Accessory Fittings
HVAC System
-- Modular Air Handling Unit
-- Water Chiller System
--Air Duct System
Lighting and Electricity System
Flooring System
Clean Room Furniture & Equipment
Clean Room Monitoring System EMS/BMS/PMS
Audited Supplier 
){kind=link}
){kind=link}