Pellet compare to powder/granule
- Improve stability and adjust the release speed to improve safety performance of medicine.
- Good flowability,less brittleness, and easy to fill.
HM PF-S series Pellet Spheroidizer
Usage: spherodize compact cylindrical granules to get final pellet
Working principle: centrifugal turntable cut granule into suitable size, centrifugal force of turntable, friction force of gear and vessel wall, and air push force of turntable to make granule three-dimensional helical rolling movement, so that even spheroidize granule into pellet.
Range: input granule diameter 0.4-3.0mm
Output pellet diameter 0.4-3.0mm
Yield: >90%
Model:HM PF-S0.6/8
Capacity: 0.1-0.6(for lab)/1.0-8.0kgs/batch
Cycle time: 2-10min
HM FBP series Fluid Bed Dries, Granulator and Coater
Usage: Dry, granule and coat function in one machine; coat film for pellet or granule
Top spray: make granule and dry wet material;
Bottom(wurster) spray: coat film
Tangent spray: make pellet and coat film
Moisture in dried material: up to 0.2%
Model: HM FBP-1/2/5/10/30/60/120/200
Capacity:
top spray 0.2-1/0.3-2/10/30/60/120/200kgs/batch
bottom spray 0.2-1/0.3-2/3/5/15/30/60/100 kgs/batch
tangent spray 0.2-1/0.3-2/3/5/15/30/60/100 kgs/batch
Cycle time: top spray, 90mins; bottome spray ,2-3 hours; tangent spray,2-3hours;
HM PF-E series Pellet Extruder
Usage: wet mixing powder material, excipients and binder to extrude compact cylindrical granules.
Working principle: wet mix the powder material, excipients, binder to have loose or lumpish soft material, which flow into extruding chamber by screw feeder ,extruder extrude them through screen to get compact cylindrical granules.
Range: output diameter 0.4-3mm
Model: HM PF-E15/120
Capacity: 3-15(for lab)/20-120kgs/h
HM HB series Herb Extraction and Concentration Unit
Usage: hot water or alcohol extract from herb roots, bark or leaves and concentration in full closed cycle
Features:
-Hot circumfluence; normal pressure extracting(≤100ºC); low temperature concentration(55-80ºC);save the time 30%
-Full close cycle to extract and concentrate, save energy for 20-50%
-PLC Control
Model: HM HB1/200,2/350,3/500,4/750,6/1000
Capacity: extract pot:1,2,3,4,6m³
Evaporation: 200,350,500,750,1000kg/h
HM HBU series Herb Ultrasonic Continuous Extraction Unit
Continuously operation, ultrasonic extraction and lixiviation refluence.
Short time (only 30-60minutes), and improved efficiency.
Capacity: 0.1 to 10 tons/day.
HM HBS series Herb Super-Critical Extraction Unit
Modern extraction technology, no chemical solvent, use super-critical CO2 as media.
High purity extract, low temperature, suitable for heat sensitive and active substance,
Capacity: 1-1000L
HM SD-C series Centrifugal Spray Drier
Usage: high speed centrifugal spray liquid material into hot air drying chamber, producing the powder from liquid material, emulsion, soliquid etc.
Features:
-inlet air temperature at 140-350 ºC automatically controlled
-output air temperature at 80-90ºC
-inlet 50-90% water content, output water content ≤5%
Suitable: drying the heat-sensitive material solution.
Model: HM SD-C5/25/50/100/150/200
Capacity: 5/25/50/100/150/200kgs/h water evaporation.
HM SD-H series Herb Ointment Spray Drier
Usage: special design to dry herb ointment into powder
Feature:
- three stages filtering air inlet
-wall cooling to 80 ºC, no powder coked.
-air sweeping and vibration to avoid powder stay on the wall.
-two stage cyclone deduster.
-quick wash and WIP
-High efficient, 3 times if standard type HM SD-C.
Model: HM SD-H25/50/100/150/200/300
Capacity: 25/50/100/150/200/300kgs/h water evaporation.
5/10/20/30/40/60 kgs/h powder.
){kind=link}